YCM-B Series Combi Drum Filter Installation Tutorial

Today let's show how to install and connect the pipe after receiving the Combi drum filter.

When you receive the package,the accessories include pipe clamps, drain valves, and electric control box.
Firstly, the equipment needs to be placed horizontally and ensure that the water outlet is 10cm higher than the horizontal surface of the fish pond.
Then, install the drain valves to each bottom sewage outlet and close the drain valves.
Connect the pipe clamp to the water inlet. We recommend that you can install a valve at the water inlet to control water flow.
Connect the water pump to the water inlet connect the sewage outlet pipe

Similarly, Connect the pipe clamp to the water outlet. Note that the pipe must be lower than the water outlet. It cannot be connected upwards and should not be connected in parallel.
Connecting the electri control box, open the aviation plug cover and then tighten the connection
This is the water level sensor,it can touch the float ball through the water level to achieve an automatic backwashing effect
in the push button control box and the backwash can be timed in the timer

In addition, our backwash timer can also control the backwash time (via "+" "-" value adjustment)
For example: if you want to flush for 30 seconds every 2 hours, you can set it to "30S 02H"
For the UV light timer, our factory setting is always on by default. Just turn on the UV light switch directly.
If you need more details, please read the manual or contact us.