Workshop Bacterial Killing Commercial Kitchen Ozone Generator
Workshop traditional disinfection features
The traditional disinfection method in the workshop is basically ultraviolet irradiation, but the actual ultraviolet irradiation distance is short, the disinfection effect is poor, and there is shadow. The back, gaps and corners of the items cannot be disinfected, so the disinfection effect cannot meet the requirements of the relevant departments.
Choosing Ozone generator to Disinfect the Workshop
Ozone has the advantages of fast disinfection speed, no residue, no dead corner, and convenient use. Disinfection of Chen Jian with ozone is a very convenient and effective method, and it is also a basic requirement for GMP, HACCP and other certification management. Depending on the cleanliness of the workshop, the required ozone concentration in the air will also vary.
Advantages of pipeline ozone generator
The QLC series ozone generator has a built-in fan, which can transport ozone over a long distance and sterilize long or long distance workshops by pipe spraying. The ozone machine can be used outside the disinfection space to prevent the humidity, dust, high temperature and low temperature in the workshop from affecting the performance of the ozone machine.
Our QLC series ozone generator can also be used in commercial kitchens, pharmaceutical factories, cosmetics workshops, GMP workshops, production workshops, poultry farms, etc.
If you want more information, please contact us and we will recommend the right machine and effect solution for you.
High quality stainless steel figure, durable and protect inside
Adapted high quality ceremic tube, long service life
Small space for installation, save place
Easy to operate, save time and worry
Remote control, convenient and fast
Low energy comsuption, environmentally friendly
24 h timer, free from repeat settings
Chinese/European/US plug support, adapt to different needs
|Ozone output||40 g/h|
|Ozone density||70-85 ppm|
|Dimension||40*30*62 cm |
|NW/GW||17.8/20.0 kg |
|Air flow||300 m³/h |
|Cooling way||Air cooling|
|Gas feeding ||Air source |