The online dissolved ozone tester can be installed to test dissolved ozone in water and show its concentration instantly.
Quantity: | |
---|---|
PROFILE
When using ozone equipment for water treatment, it is necessary to monitor the ozone concentration in the water to regulate the ozone output in time.
This dial-mounted ozone on-line inspection device meets the requirements of real-time display. At the same time, it is easy to install, easy to operate and easy to maintain.
FEATURES
Small size, save place
Digital display panel, intuitive and convenient
High accuracy, deviation value is small
Two optional measuring range and resolution, adapt to different working environment
Easy to operate, very simple
Easy to install, save time and worry
DISPLAY
CLICK HERE TO SEE VIDEO DISPLAY
SPECIFICATION
Model | DOZ6000 | |
Dissolved Ozone | Range | 0.00-2.00 mg/L or 0.00-20.00 mg/L |
Resolution | 0.001 mg/L or 0.01 mg/L | |
Accuracy | 1% ± 1 LSD | |
Temperature | Range | -10.00-110.0 °C |
Resolution | 0.1 °C | |
Accuracy | ±0.3 °C | |
Input | 22 kΩ/PT1000 | |
Compensation | Automatic -5.0-100 °C | |
Current output | Range | 4-20 mA (adjustable) |
Accuracy | 1% FS | |
Load | <500 Ω | |
On off control | Control method | 2SPST relay |
Output load | 2.5 A/230 V AC | |
Data interface | RS485 | RS485 modbus protocol |
Other parameters | Working power | 85-260 V AC or 12-36 V DC |
Working temperature | 0-60 °C | |
Working humidity | <90% | |
Levels of protection | IP65 | |
Installation | Wall-mounted | |
Dimension(H*W*D) | 158*188*108 mm | |
Hole size | / | |
Weight | 0.7 kg |