Cooling Tower Water Treatment Commercial Ozone Generator
Problems in cooling tower
The cooling water is continuously circulated in the circulation system. Due to the evaporation of water and a large amount of external dust entering the water, it causes the enrichment of various inorganic ions and organic substances, thereby providing a rich nutrient for the growth of bacteria and microorganisms, and the circulating cooling The temperature and humidity of water are especially suitable for the growth of bacteria and microorganisms. Metabolites of microorganisms can cause serious sediment adhesion, equipment corrosion, and large-scale breeding of bacteria and algae microorganisms, as well as problems such as clogging of pipes caused by slime and dirt. At the same time, it will breed deadly bacteria such as Legionella. These bacteria will float around the air and pose a threat to human life and health.
Why choose ozone for cooling tower water treatment
The use of chlorine disinfection produces a variety of carcinogenic chlorinated organics, thus limiting the use of chlorine disinfection in circulating water.
Ozone, as a water treatment agent, has the advantages of simple operation, strong sterilization ability, and low sewage discharge. It can save water and energy without adjusting the pH value of water, and there is no secondary pollution. It has the advantages of corrosion inhibition and scale inhibition on circulating water., Killing, etc. have good results.
Instructions for using ozone generator for cooling tower
Using ozone in circulating water is very simple, just add ozone to the collection tank, and its concentration can be adjusted automatically by the ORP ozone concentration monitor.
Cubic design, stable and reliable
High quality stainless steel figure, durable and protect inside
Adapted corona discharge technology, long service life
Light weight, portable to be taken
Easy to operate, save time and worry
Low energy comsuption, environmentally friendly
Double light indicator, easy to check fault
Optional timer function, free from repeat settings
Chinese/European/US plug support, adapt to different needs
|Ozone output||15 g/h|
|Purify area ||50-100 ㎡|
|Ozone density||Default: 15-25 mg/L / External oxygen source: 60-120 mg/L |
|Dimension||40*30*62 cm |
|NW/GW||14.2/16.4 kg |
|Cooling way||Air cooling|
|Gas feeding ||Air source(Optional external oxygen source) |